Civil Engineer (Environmental)

Applications will be accepted from any U.S. citizen. Direct Hire Authority will be used to fill this position. Veterans Preference and traditional rating and ranking of applicants does not apply to this vacancy.

Apply on line through USAJOBS.gov USAJOBS - Job Announcement

Provide professional expertise for civil engineer activities conducted in support of various facilities projects and programs, with an emphasis on water systems, wastewater systems, hazardous materials/waste management.

Assist in the development of technical specifications for materials and/or construction details to be employed. Develop plans, drawings, and studies for various project design submittals.

Maintain unit activities in compliance with the Clean Air Act, Clean Water Act, and with State Environmental statutes and regulations as implemented by local agencies. Serve as Contracting Officer's Representative (COR) or similar position, conducting field inspections on construction contracts during construction to determine progress and maintenance/operation requirements.

Ensure all water and wastewater systems are in compliance with all federal, state, and local regulations, including special-use permitted systems. Manage the hazardous material operations program on the unit.

Prepare contract specifications and statement of work for construction and maintenance projects. Utilize various forms of computer hardware and software in order to accomplish assigned tasks such as making, evaluating, and documenting design decisions and producing contract documents.

Prepare competitive bidding cost estimates for construction and maintenance projects performed under contract.

Coordinate with personnel to manage water/wastewater systems in accordance with codes and regulations. Coordinate with other personnel to perform routine water quality testing.

Work with engineering and other specialists during the design phase to assist in integrating design features on projects.

In order to qualify, you must meet the eligibility and qualifications requirements as defined below by the closing date of the announcement. For more information on the qualifications for this position, visit the Office of Personnel Management's General Schedule Qualification Standards.

Your application and resume must clearly show that you possess the experience requirements. Transcripts must be provided for qualifications based on education. Provide course descriptions as necessary.

For the GS-0810 series: Applicants must meet all qualifications and eligibility requirements by the closing date of the announcement as defined below. For more information on the qualifications for this position, go to: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0810/ .

Degree: Successful completion of a full 4-year course of study in an accredited college or university leading to a Bachelor's or higher degree that included a major field of study in professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

Professional registration -- Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

Written Test -- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico.

Applicants who have passed the EIT examination and have completed all the requirements for either (a) a Bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-05. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A.

Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination.

Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described for a degree.

Related curriculum -- Successful completion of a curriculum leading to a Bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

For the GS-11 level: Applicants must have 3 years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent Doctoral degree (coursework directly related to position being filled); OR One year of specialized experience equivalent to at least the GS-09 level; OR An appropriate combination of specialized experience and graduate level education (beyond what is required for a Master's degree, i.e., more than 36 semester hours leading to a Ph.D.) Professional engineering experience is defined as nonroutine engineering work that required and was characterized by (1) professional knowledge of engineering; (2) professional ability to apply such knowledge to engineering problems; and (3) positive and continuing development of professional knowledge and ability.

Examples of specialized experience are: Conducted engineering field inspections during construction to determine if construction-in-progress adheres to design criteria; Developed and prepared competitive bidding cost estimates for construction and maintenance projects; Coordinated hazardous material response activities; Worked on corrective action plans in response to environmental compliance audits; Served as an assistant to the facilities engineer.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

See Qualifications Section.